The astonishing Walther LGV – Part I

Monday, February 4, 2013
The new Walther LGV with optional scope.

The new Walther LGV with optional scope.

Greg from www.airgunsofarizona.com was on the phone with me, discussing what airguns he was going to send my way for testing. “Walther has come out with a new LGV,” he said.

I got excited. “Really?!! Send me one right away!”

“Whoa,” Greg said. “It’s not the same as the old LGV. It’s more of a sporting rifle, but they’ve put a lot of new technology into it.”

“Oh,” I said, wondering if the latest incarnation of the LGV would be a disappointment.

The airgun industry has been around for quite a while, and airgun manufacturers will, from time to time, bring out a new rifle bearing an old name. The last time this happened (with a manufacturer who shall be nameless), the result was a rifle that was really very disappointing on many levels.

The original Walther LGV, image courtesy of Walther.

The original Walther LGV, image courtesy of Walther.

And to set up this story properly, you need to understand that the Walther LGV was a high-precision ten-meter target rifle introduced in 1964. It was a breakbarrel rifle with a positive barrel lock that insured that the barrel hinge always returned to the same position. Original LGVs are still prized as collector’s items today, and they are still fun to shoot.

Similar to the original LGV, the new LGV also incorporates a positive barrel lock to insure that the break barrel returns to the same position every single time. More about that later. Let’s take a guide tour of the new LGV. There are several different variations of the new LGV, which you can see here http://www.airgunsofarizona.com/WaltherLGV.html I tested the LGV Master Ultra in .22 caliber. It stretches 43.25 inches from end to end and weighs 8.85 lbs before mounting a scope.

Walther LGV 009

At the rear of the LGV is a thick ventilated rubber butt pad. It is attached to a fully ambidextrous hardwood stock. There is a slight bulge and rise on either side of the buttstock for a cheek piece. The pistol is sloped at a roughly 45 degree angle and is checkered on either side and engraved with the Walther name. Ahead of the pistol grip is a black metal trigger guard that surrounds a black trigger. I believe the trigger is plastic, although it might be an alloy (a metal “tuning” trigger is available as an option, according the manual), and it is adjustable for first stage travel and for trigger weight.

Ahead of that, the forestock is unadorned and tapers slightly to the end. The underside is fairly flat-bottomed, and toward the end you’ll find a slot for the cocking mechanism. At the far end of the forestock is a lever for releasing the barrel lock. Above that is the barrel (the LGV is available in both .177 and .22) and attached to that is a large metal fitting that serves as a cocking aid, the mount for the globe front sight (which has interchangeable inserts), and a knurled barrel nut which can be unscrewed to allow the mounting of Walther’s proprietary three-chamber silencer (where legal).

Moving back along the barrel, a micro-adjustable notch-type rear sight is mounted on the breech block. Moving further aft, the rear of the receiver has dovetails for mounting a scope and three holes into which anti-recoil pins may be fitted. At the very end of the receiver, you’ll find a push-pull safety which is resettable.

That’s all there is to the Walther LGV . . . or is there? When I took the new LGV out of its box, I notice a couple of symbols on the edge of the manual. One of them said “Vibration reduction system,” and the other said “Super silent technology.”

Curious, I looked up “Walther LGV” on the Internet and found that Walther had created an entire new website devoted to this new series of rifles. Obviously, the good folks at Walther were serious about the technology they had put into this new rifle.

We’ll get into that next time, in addition to shooting the new LGV.

Til next time, aim true and shoot straight.

–          Jock Elliott

6 Comments

  1. 1772225 says:

    O.K. I fell the teaser post. … Can’t wait to hear more.

    1. Jock Elliott says:

      Stay tuned next week!

  2. SteveInMN says:

    The Walther factory website lists 11.8 fpe and 16.9 fpe versions in .177. Sure hope UMAREX knows Americans well enough to not even bother with importing the UK limpy!

  3. Jok Prayogo says:

    Hi, I just bought a Walther LGV Master Ultra in .177. Recently, this gun has ruin my Hawke scope (sidewinder 30 SF 6.5 – 20 x 42.
    What kind of scope that you would like to recommend for this gun? I prefer 30mm tube with SWF and Mildot reticle.
    Thanks,
    Jok

    1. Jock Elliott says:

      jok,

      I have had good experience with these scopes: http://www.airgunsofarizona.com/Vortex.html

      1. Jok Prayogo says:

        Hi Jock,

        Thanks – appreciate that.

        Cheers,
        Jok

Leave a Reply

nineteen + five =