It’s not an uncommon theme: when airgunners want to spend a day or half day wandering the woods and fields with their favorite pneumatic arm, they don’t want to be hauling around a lot of weight. Trudging around with a heavy burden diminishes the experience.
Some time ago, I wrote a blog on “The 7.5 pound hunting rig,” http://18.104.22.168/blog/2011/01/the-7-5-pound-hunting-rig.html and while it is not a hard-and-fast rule, 7.5 lbs seems to be about the limit of what many hunters want to tote afield.
The Brocock Specialist easily makes the weight limit. In fact, with a Hawke Varmint 2.5-10 x 44 scope mounted, the entire rig weighs just 6 lbs. 7 oz. In addition, the Specialist stretches just 34.5 inches from end to end. The ambidextrous stock is molded from matte black engineering polymer, and at the aft end, you’ll find a soft rubber butt pad attached to the buttstock. Moving forward, there is a raised cheek piece on either side, but the portion of the buttstock below the cheek piece is simply cutaway, thereby saving weight.
Moving forward again, there is a nearly vertical pistol grip that flares at the end and has molded-in checkering on either side. Forward of that, a piece of black metal serves as a trigger guard, but does not go completely around the black metal trigger. Beyond that, the forestock curves gently upward and has molded-in checkering on either side for improved grip.
Extending from the end of the forestock is the air reservoir, which has a screw-off metal cap at the end. Remove it, and you’ll find a male foster fitting for charging the reservoir with air from a SCUBA tank or a high-pressure pump. A barrel band connects the air reservoir with the barrel above which is fitted with some sort of bull barrel sleeve. Both the barrel and barrel band are finished in black. At the muzzle end of the barrel is a screw-off metal fitting which can be removed so that a silencer can be fitted (where legal). Between the barrel and the metal muzzle fitting is a silver metal spacer.
Moving back along the barrel, you’ll come to the receiver, also finished in black. On the left side of the receiver is a small rectangular protrusion which I presume has something to do with the operation of the magazine. On the right side of the receiver is a rectangular slot into which the six-shot rotary magazine is inserted. Toward the rear of the receiver on the right hand side you’ll find the bolt which has two locking slots – one to hold the bolt closed and the other to hold the bolt open.
The fit and finish of this rifle are excellent, and I found it very comfortable to shoulder and shoot. In addition, I really liked the Hawke Varmint 2.5-10 x 44 scope. It looks to be well built, the optics are nice and clear, and the mil-dot reticle has lots of aiming points. I prefer mil-dot scopes because you can zero them at one range and then figure out what ranges the other mil-dots correspond to. This gives you the option to instantly compensate for the pellet’s trajectory at various ranges. In addition, the side focusing knob was buttery smooth and an absolute pleasure to use.
Next time, we’ll take a look at how the Brocock Specialist shoots.
Til then, aim true and shoot straight.
– Jock Elliott