Huma External Regulator for Air Arms S200 .177 and .22
The Huma-Air regulator will regulate the air pressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a lower pre-set working pressure. This will give you a constant pellet speed and a higher accuracy; no more compensation on the (H)FT lane!
The installation of the S200 regulator is very simple. Unscrew your air cylinder, screw the regulator between firing valve body and pressure tube and you are ready*
It is vented to the atmosphere, so no creeping up in power during time, without the need of a breathing hole in the cylinder.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pellet speed.
Due to the length this reg has a restricted air volume, so this makes it specialy suitable for the 12 ft/lbs – 16 Joule versions. The maximum power of the reg is about 20 ft/lbs – 30 Joule.
The regulator adds about 46.5 mm of length to the cylinder. Because there are many different lengths of cylinders and barrels, it is advisable to check whether this does not disturb the placement of a silencer.
The installation of the S200 regulator is very simple. Unscrew your air cylinder, screw the regulator between firing valve body and pressure tube and you are ready*
It is vented to the atmosphere, so no creeping up in power during time, without the need of a breathing hole in the cylinder.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pellet speed.
Benefits to using this Huma Regulator:
- The regulator housing is made of extremely tough 42Cr steel
- Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety
- A constant pellet speed over the full working pressure range
- Because the reg body comes between tube and valve you will get 45 mm. extra air volume
- The regulator body and the housing are one piece, so no chance of the regulator moving inside the cylinder
- The one piece body and regulator housing also reduces the possibility of leaks
- DIY fitting is a real option for the most people
- High quality bluing in the same matte color as the original pressure tube
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- It will give you a better shotcount and a full flat shotstring immediately
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Due to the length this reg has a restricted air volume, so this makes it specialy suitable for the 12 ft/lbs – 16 Joule versions. The maximum power of the reg is about 20 ft/lbs – 30 Joule.
The regulator adds about 46.5 mm of length to the cylinder. Because there are many different lengths of cylinders and barrels, it is advisable to check whether this does not disturb the placement of a silencer.