About Jock Elliott
Located in upstate New York, I never met a projectile launcher I didn't like. Besides fooling around with airguns, bows, and blowguns, I pick banjo and guitar. I share my life with my wife, son, and a variety of furry creatures.
Posts by Jock Elliott
I came upon the subject for this blog quite by accident, and it was all my fault.
A while back I had been whining to Greg, my chief contact at Airguns of Arizona, about how winter was coming in big, bad upstate New York, and if the winter was anything like last year, there was going to be a period – maybe a long period — when I would be unable to test airguns. So would they please – please, please, PLEASE! – send me some guns to test in a big hurry!
Here's the reason for the whining: this is what El Rancho Elliott looked like after the first storm in January 2011.
And just to prove that I am not psychic in any way, here is approximately the same view on Jan. 2 of 2012.
Greg, being an excellent fellow, in great haste dispatched a large package containing several guns, which I then proceeded to test. When I got to the last gun, disaster struck. The bolt would not cycle properly, after which I could not get the fully loaded magazine out of the breech.
So here I was with a fully loaded, fully charged PCP air rifle that I could not unload. This makes me really uncomfortable, and I was borderline freaking out when I called AoA and got Shane on the line. He immediately gave me the procedure for getting the magazine out of the breech. I tried it, and it worked. Next, Shane wanted me to run a cleaning rod down the barrel to make sure that that there wasn’t a pellet jammed in there.
Dutifully, I slid the rod down the barrel and a mashed pellet and a machined brass cylinder came out. I reported this to Shane (we were doing this in real time on the phone), and he said, “Oh, you must have a gun that wasn’t prepped.”
“Wasn’t prepped,” I said. “Whaddya mean?”
“We prep almost every air rifle we ship,” Shane said. “You need to talk to Darren. He’s our primary prep guy.”
So I interviewed Darren, and what follows is the real and true story of how Airguns of Arizona preps air rifles before you get them.
When it comes to prepping precharged air rifles, the first is the removal of any special fittings that are attached to the gun for shipping. Some PCPs have a barrel plug and a special restrictor screw that are fitted so that the gun can be legally exported from the country of origin. (The barrel plug is what I ran into when the magazine jammed in the gun.)
After any shipping fittings are removed, the gun is visually inspected for any dings or pressure marks in the stock, any rust, signs of damage, any molding issues on synthetic stocks.
Here's Darren prepping a gun for a customer.
“After that,” Darren says, “we test most precharged guns for accuracy and velocity.” (There are some exceptions to this: there are some models that come shipped in well-sealed factory packaging, and AOA allows the manufacturer/distributor to deal with any quality issues on these models. It is too easy for a customer to confuse AOA’s testing with supplying of a used gun due to the torn packaging.)
“We’ll mount a scope and benchrest the gun at 18 yards,” he says. “If the customer is purchasing a scope with the gun, we’ll mount the customer’s scope and sight it in. We’ll test up to five different pellets to find the best pellets for that gun, and we’ll generally test with a heavy pellet to make sure that it is generating the proper amount of foot pounds.”
If there is a problem with the accuracy of the gun, AoA investigates why – looking for problems like perhaps a bad barrel or clipping issues. AoA will also hold up shipment on a gun if there is a dramatic spread in velocities. When everything checks out properly, Darren will print out chronograph receipt and the test target, sign off on the gun, and include those with the gun as it is shipped to the customer.
All spring-piston air rifles are tested for velocity, usually for 5-10 shots to make sure that it is consistent. “We don’t generally test for accuracy,” Darren says, “but if a customer buys a scope with their springer, we will mount it, sight it in, and shoot a five-shoot group with it.”
He adds, “I test so many airguns that very often I will know if there is an issue with a gun simply by the way it sounds and feels when I shoot it. Sometimes when we’re shipping several of the same model gun, I’ll test them side-by-side to give me an additional check on quality and consistency.”
With the exception of a few isolated models, Airguns of Arizona routinely preps the air rifles it sends to customers – at no additional charge. “It makes sense to do that,” Darren says. “It ensures customer satisfaction, reduces hassles at our end, and, if a gun arrives at a customer with a problem, we know that something happened to it between here and there.”
Til next time, aim true and shoot straight.
Jock Elliott
It shoots as good as it looks!
To get the Daystate Huntsman Classic XL ready to shoot, remove the cap at the end of the air reservoir, attach a high pressure pump or SCUBA tank, and charge the reservoir up to 230 BAR maximum.
To remove the 10-shot magazine from the breech, first apply the safety catch. Next, lift the bolt handle at the rear of the breech block and pull it all the way back until fully cocked. Next move the bolt forward just a little bit until you feel a click. Now the magazine can be removed. (If you attempt to remove the magazine before you feel the click, it won’t work.)
There is a lot to like about the Huntsman Classic, but one of the things that I particularly like is the 10-shot rotary magazine. It is, hands down, the easiest to load magazine currently available. There is no twisting of top plates, no dropping in pellets to lock the top plate in place, no clicking your heels and saying “there’s no place like home.”
The magazine is super easy to load.
Instead, all you have to do is drop a pellet head-first into the large hole at the bottom of the backside of the magazine. You have to make sure that the pellet head slips past the o-ring that circles the perimeter of the pellet ring, and sometimes I use the tip of a ballpoint pen to give the pellet a quick poke to do that. Next rotate the pellet ring counter-clockwise to bring the next empty bay in line with the loading port and drop in another pellet. Frankly, it takes longer to describe the procedure than to do it. Continue this one click at a time until all 10 pellets has been loaded. When the magazine is full, slide it back into position in the breech block and return the bolt forward to the closed and locked position. Now you’re good to go.
Take aim at the target, flick the safety off, and start to squeeze the trigger. On the sample that I tested, the first stage required only 9.6 ounces of pressure. At about 1 pound 4.4 ounces, the shot goes off.
The Huntsman Classic XL launches JSB .177 Heavy 10.3 grain pellets at an average of 904 fps, making average energy 18.77 foot pounds. In addition, because of the extra large (that’s what the XL stands for) air reservoir, it delivers over 55 shots on a fill (see the curve below.) Peak velocity is 918 fps, for 19.35 foot pounds of energy.
The XL produces a surprisingly subdued report. It is by no means completely silent, but it is not nearly as loud as I expected. There is some shrouding in the barrel, which helps to quiet the XL, but the main reason for the relatively quiet report is the Steve Harper designed “slingshot” valve. This patented valve design eliminates the hammer bounce that plagues so many other pre-charged, CO2, and multi-stroke air rifles and air pistols that store gas under pressure and employ a knock-open valve.
Here’s how hammer bounce happens. When the airgunner triggers the shot, the hammer hits the valve and knocks it open. The very next thing that happens is that the compressed gas inside the reservoir acts like a spring and pushes the valve shut, often with enough force to drive the hammer back off the valve. The hammer then slams back down on the valve and pops the valve open again. When this happens, the gun wastes air (or CO2) and makes a louder report than necessary. Even worse, hammer bounce does absolutely nothing useful, since the pellet has already left the barrel when the hammer bounce occurs.
Because Harper slingshot valve prevents hammer bounce, it produces performance comparable to a computerized Daystate air rifle – including efficient use of air, a very high number of shots per charge, a flat power curve, an ultra-fast firing cycle and a relatively quiet muzzle discharge. As effective as the slingshot system is, it’s also remarkably simple and, therefore is backed by a three-year warranty.
The Huntsman delivers the kind of accuracy that I have come to expect from Daystate air rifles. At 30 yards, under far less than ideal conditions, the XL put five shots into a group you could easily cover with a dime. I expect that, under ideal conditions, it will deliver similar sized groups at 50 yards.
The Daystate Huntsman Classic XL has just about everything any serious airgunner would want: excellent accuracy, high efficiency, a very nice trigger, and a reasonable report . . . and those good looks don’t hurt either. Who wouldn’t be pleased with an air rifle like that?
Til next time, aim true and shoot straight.
– Jock Elliott
The Daystate Huntsman Classic XL
Some years ago, very early in my career as an airgun writer, I was taught an important and harsh lesson: when it comes to airgun performance, looks don’t matter. The gun in question was a Beeman Crow Magnum. It had been loaned to me, and when I pulled it from the box, I fell instantly in love. The exotic hardwood stock was a thing of beauty, and the bluing on the metal work looked like it was a foot deep. After just one look, I was already making plans to justify purchasing such an expensive springer.
As soon I shot the Crow Magnum, I rapidly changed my mind. I couldn’t adapt to the recoil of the powerful Theoben gas-ram powerplant, and I was unable to shoot better than 1.5 inch groups at 10 yards. Beautiful or not, I couldn’t wait to send that gun back to its owner. (Eventually I asked another airgunner who had mastered the Crow Magnum how he did it, and he said that the secret was to “apprentice yourself to the Crow Magnum and don’t shoot anything else. When you do that, the Crow Magnum shoots as good as it looks.”)
Having said all that, I would be less than forthright if I didn’t admit that I was taken with the looks of the Daystate Huntsman Classic XL in .177. It is a beautiful air rifle that stretches 38 inches from end to and weighs just a bit over six pounds. The version that I tested was designated “XL,” which means that it has an extra-large air reservoir to extend the shot count per fill, although the folks at Airguns of Arizona tell me that the short air tube version actually out-sells the XL. Go figure.
The ventilated butt pad and other goodies.
At the extreme aft end of the XL is a ventilated rubber butt plate attached to a Walnut stock with a black spacer. The stock is right-handed and has a distinct cheek piece on the left hand side of the stock. Forward of the buttstock is the pistol grip, which is checkered on both sides and is fitted with the rosewood cap and a lighter colored spacer.
The trigger group, bolt, and magazine.
Ahead of the pistol grip is a metal trigger guard with a silver-colored metal trigger inside. The two-stage trigger is adjustable for second stage weight, trigger blade angle, and first stage travel. Above the trigger guard, on either side of the stock, the Daystate name and emblem are incised into the stock. Ahead of the trigger assembly is an allen screw for holding the action in the stock, and just ahead of that is an air gauge that reads in bar.
Moving toward the muzzle again, the forestock is checkered on either side. At the end of the forestock are a barrel band and a black metal cap, which when removed, reveals a foster fitting for filling the air reservoir. Above the air reservoir is the matte black finished barrel which is shrouded to reduce the report of the XL. At the end of the barrel is a cap that can be unscrewed for fitting a silencer where legal.
Traveling back along the barrel, you’ll find the receiver, which has dovetails for fitting a scope, the breech – where the ten-shot rotary magazine can be inserted – and the silver-finished bolt handle. Below the bolt handle on the left side of the receiver is the rotary safety. Flick the red anodized tab UP for fire and DOWN for safe.
Next time, we’ll see how the Daystate Huntsman Classic XL shoots.
Til then, aim true and shoot straight.
– Jock Elliott
Well, it’s that time of year again, when visions of shiny new airguns dance in airgunners’ heads. While I certainly hope that you get some gift that makes your heart swell with joy, I’ve been thinking lately about some gifts that we might give to bring others joy.
Give a part to a fellow airgunner. Scarcely a week goes by on one of the airgun forums but some airgunner sends out a plea that he needs some screw, nut, or other small bit for one of his airguns. If you happen to be in possession of the needed part, consider slipping it into an envelope and send it to him with your best wishes. An airgunner did this for me a few years ago. I smile every time I think of it, and the donor enjoys a warm spot in my heart forever.
Make nice with the neighbors. If you are on good terms with your neighbors and are taking up airgunning, you might let them know, in the nicest and friendliest way, that you are doing so. You might say something like: “Fred (or Bob or whoever), if you see me in the back yard with a rifle, it’s not a firearm. I’ve taken up shooting a quiet, low-powered airgun. It’s perfectly legal (check to make sure that it is where you live). I am as concerned about safety as you are, so I’ll be shooting into a pellet trap that captures the pellets and prevents ricochets, and I’ll always shoot in a safe direction.” If your neighbor expresses an interest in your airgun, you might even invite him to shoot with you some time.
Teach someone to shoot. One of the nicest, most generous things you can do is to teach someone to shoot. Those of us who have been shooting for a while may have forgotten that initial thrill of pulling the trigger and seeing a hole appear in the target. I had this forcefully brought home to me a couple of years ago when the nice folks at Airguns of Arizona brought me out to the NRA show in Phoenix. In one of the big rooms upstairs, there was an airgun shooting range with about 20 lanes for shooters. A couple of parents brought a ten year old girl into the room and asked her if she would like to try shooting an air rifle. “I don’t like guns,” she said. One of the fellows on the shooting line said, “Just try one shot, and if you don’t like it, you can quit, okay?” She said okay and started to settle in behind one of the guns, and I went off to check out some of the guns further on down the line. A little while later I wandered back up the line, and this time the girl was having a different problem – she didn’t want to get off the gun. “Just let me shoot a few more pellets!” A new shooter had been born, and now she has a lifetime of shooting fun to enjoy.
Donate an airgun to a youth shooting program. Checking around my area, I find that most youth shooting programs are low on equipment and funds. If you want to be extravagantly cool and generous, give an air rifle or air pistol to a youth shooting program in your area. They will thank you for it, and you’ll have the satisfaction of knowing that you are helping to train the next generation of shooters.
Cut a forum poster some slack. Since this is the time of year for Peace on Earth, Good Will Toward Men, you might consider digging deeply into your reserves of courtesy and friendliness when dealing with on-line airgun forums. Most airgunners who post are polite, but occasionally you’ll run into someone who is either dreadfully misinformed or exceedingly grumpy. Either way, they come off as wrong-headed. Nevertheless, when that happens, give them an extra helping of courtesy and deal with them politely. We’ll all benefit from that.
If you have your own ideas for gifts we can give each other, I’d love to hear them.
Til next time, aim true and shoot straight.
– Jock Elliott
The layout of the HW50S is simplicity itself.
I think perhaps I have finally figured it out . . . what my favorite Weihrauch air rifle is – the HW50S in .177. Over the years, I have owned (and still own) a variety of Weihrauch air rifles, from the big, hairy HW80 to the tackdriving but heavy HW97 to the diminutive HW30S.
Each has its advantages and its charms, but as the years roll on (hey, maybe I’m getting old and creaky), I find that I turn increasingly to lighter air rifles for a day afield. The lovely HW30S measures just 38.78 inches end to end and weighs just 5.1 lbs, but there are times when I am shooting it that I wish it had just a wee bit more velocity and power.
Enter the HW50S. It’s just 40.5 inches long weighs only 6.8 lbs. Over the years, I’ve had the opportunity to test a couple of samples in .22 caliber (the standard and the Stainless versions), but I’ve never shot the HW50S in .177 until recently.
The is a slight swell of a cheek piece on the left side of the buttstock for righthanded shooters, but lefties should have no problem with the HW50S.
This is not an air rifle that is out to impress anyone with its glitz; there is no checkering or other adornment anywhere. At the extreme aft end, there is a brown rubber butt pad with a black spacer and a slight swell for a cheek piece on the left-hand side of the stock, but the buttstock is so nearly symmetrical that lefties should have no problem shooting this rifle. The forestock extends over the two-piece cocking linkage and breech block. The two-piece cocking linkage increases cocking effort (more about this later) but allows the action to be anchored by a single big screw in a steel seat underneath the forestock.
The Rekord trigger is crisp and adjustable.
The trigger guard is black metal. It fastens to the stock with two screws. Inside the trigger guard is a typical Rekord trigger setup: a silver metal trigger and a silver adjustment screw.
The front sight has interchangeable inserts.
The barrel is 15.5 inches long, and on top of it at the muzzle end you’ll find a globe sight with interchangeable inserts. The receiver has three holes for anti-recoil pins and a push-button safety at the rear. That’s it; the HW50S is a statement in simplicity.
With the two .22 versions of the HW50S that I tested in the past, I found the cocking effort to be pretty “stout,” between 30-35 lbs., but the .177 version I’m testing this time seemed easier. Maybe it is just unit-to-unit variation; I don’t know. In any event, you should realize, going in, that the HW50S is not going to be as easy to cock as an HW30S.
To ready the HW50S for shooting, grab the end of the barrel and crank it down and back until it latches, stuff a pellet in the breech, and return the barrel to its original position. Click off the safety, take aim, and squeeze the trigger. The Rekord trigger is crisp and clean and can be easily adjusted. With the factory adjustments, the first stage comes out between 1-2 lbs, and the second stage at 3-4 lbs.
The shot cycle is very subdued, kind of a muted “tunk,” and there is a just a hint of vibration that is heard more than felt. In all this is a very pleasant air rifle to shoot, and its subdued report ought to keep the neighbors happy. It is, in fact, to my ears one of the quietest springer air rifles that I have ever shot.
The HW50S launches 8.44 grain JSB Exact pellets at around 740 fps. I found it put five pellets into a group at 13 yards that you could cover with a pencil eraser. Overall, I have found the HW50S accurate enough to shoot in Hunter Class field target, and I actually took 2nd in a match with a .22 HW50S a few years ago.
I liked the .177 HW50S a whole lot, and I think it would put a huge grin on any airgunner’s face. Santa, are you listening?
Til next time, aim true and shoot straight.
– Jock Elliott
The Webley Alecto Ultra in its nice case.
Those of you who have been reading this blog for a while will remember that back in May of this year I had the opportunity to review a really nice air pistol, the Webley Alecto. If you want to check out that blog, you can read it here: http://198.154.244.69/blog/2011/05/a-happy-surprise-%e2%80%93-the-webley-alecto.html
I concluded in that review that the Alecto “delivers a whole lot to like an a handsome package: a virtually recoilless pistol suitable for high precision plinking, casual target competition, or pest control at close range,” and I stand by that conclusion.
Yet at the same time that I wrote that, a small part of my brain was mulling over whether the Webley Alecto would be a suitable highly-portable game-getter in survival situation. I thought at the time that probably one could get by with the Webley Alecto, but, gee, wouldn’t it be nice if it had just a wee bit more velocity and power . . .
So perhaps you can imagine my glee when I opened the vinyl case that the Webley Alecto Ultra comes in and discovered that “Ultra” means that the barrel has been extended by just a scootch over three inches. That has got to make a difference, right? We’ll get to that in just a little while.
The left side.
Available in .177 and .22, stretching just 13 1/8 inches long, and weighing 2.6 pounds, most of the Ultra is made of matte black engineering polymer. At the aft end of the pistol is a metal notch sight that is adjustable for elevation and windage. On either side of the upper cover of the Ultra just below the rear sight is a lever. Pulling both of these levers at the same time releases the upper cover for cocking and loading. On top of the receiver is a weaver-width dovetail that has one notch cut in it. At the far end of the upper receiver, is a blade front sight with a small red dot on it, so that the sight radius of the Webley Alecto standard and Webley Alecto Ultra is exactly the same. This sight can be rotated 90 degrees and another front blade of lower height pops up in its place. The barrel protrudes another 3 inches beyond the end of the receiver and is fitted with a series of circular grooves near the muzzle.
Underneath the forward end of the receiver, you’ll find another Weaver rail (this one with 7 notches) for mounting accessories such as a flashlight or laser. Moving aft, the trigger guard is molded of matte black polymer and encloses a silver metal trigger and push-pull automatic safety. The trigger is adjustable for left, right and downward movement; trigger position forward and aft; and trigger spring strength, from just under a pound to about 4 pounds. Moving to the rear again, you’ll find a match-style grip (available in left or right hand) with an adjustable palm shelf. It is, in all, a fancy looking air pistol.
The action, partly opened.
Getting the Ultra ready for shooting requires pulling the levers on either side of the upper cover upward and then swinging the aft end of the upper cover up and forward until the cover is completely open. Returning the upper cover to its original position charges the action, cocks the trigger, and activates the automatic safety. You can pump the Ultra up to three times (a fact the User’s Manual is strangely reluctant to mention), and the effort becomes stiffer with each successive stroke. Before completing the last stroke, insert a pellet into the end of barrel prior to returning the upper cover to its original position.
The action fully opened for inserting a pellet.
Now you’re ready. Take aim at your target, flick the safety off (you can’t help but notice the automatic safety since it blocks the trigger), and squeeze the trigger. At 1 lb. 1.4 oz., the first stage comes out. At 1 lb. 12 oz., the shot goes off with a pop. (The pop gets louder as the Ultra is charged with more pumps). At one pump, the Ultra launches 7.9 grain Crosman .177 Premier pellets at around 379 fps; at 2 pumps, about 518 fps, and at 3 pumps, about 599 fps. By comparison, at one pump, the Alecto standard launches 7.9 grain Crosman .177 Premier pellets at around 365 fps; at 2 pumps, about 480 fps, and at 3 pumps, about 560 fps.
Do the math, and you’ll find that extra three inches of barrel delivers a 4 percent increase in velocity at one pump; an 8 percent increase in fps at 2 pumps, and a 7 percent increase at three pumps. This translates to an 8 percent increase in power at one pump; 16 percent increase in foot-pounds of energy at the muzzle at two pumps; and 14 percent increase to 6.29 fp at three pumps. That’s plenty good enough for taking small game at close range with proper shot placement.
I found I could shoot dime-sized groups at 13 yards with the Ultra. My only suggestion for improving this impressive pistol would be more notches in the rail on top of the receiver to make it easier to mount a red dot.
The Webley Alecto Ultra delivers all the goodies of the Alecto standard — a handsome package: a virtually recoilless pistol suitable for high-precision plinking, casual target competition, or pest control at close range – plus a wee bit more power, and I think a whole lot of airgunners just might find this is their favorite air pistol.
Til next time, aim true and shoot straight,
– Jock Elliott
The M4-177 with the stock collapsed.
Recently Crosman Corporation brought out a new air rifle – the Crosman M4-177 Pneumatic Air Rifle. As the “M4” in the name strongly implies, this new rifle looks like a tactical carbine, the same look that a lot of powder-burning varmint rifles have adopted in recent years.
The M4-177 is a .177 caliber multi-stroke pneumatic air rifle capable of launching both .177 pellets and .177 BBs. Almost all the visible parts of the M4-177 are molded of engineering polymer. Not surprisingly, it weighs just 3 lbs 9 oz and stretches just 30.3 inches from end to end with the stock collapsed, and 33.75 inches with the stock fully extended.
The M4-177 with the stock extended.
At the extreme aft end of the M4-177 is corrugated butt plate that has slots top and bottom for attaching a shoulder strap. A lever underneath the adjustable stock allows to be slid in and out to adjust the length of pull (LOP – from trigger blade to butt plate) to the shooter’s preference. The LOP can be as short as 9.75 inches or as long as 13 inches.
Forward of the butt stock is the black polymer receiver which has a black polymer pistol grip attached below it at roughly a 45 degree angle. On the left side of the receiver is a tab that can be rotated sideways to allow a generous supply of BBs to be poured into the M4-177 and a BB retainer button.
The hole into which up to 350 BBs can be poured.
Ahead of the pistol grip is the trigger guard which surrounds a black plastic trigger and which houses a push-button safety. Forward of that is a magazine housing. The faux magazine can be dropped out of the housing, and serves as a storage place for the 5-shot pellet clip and the tool for adjusting the front sight.
The faux magazine serves as a storage place for the pellet clip and the front sight adjustment tool.
Forward of the magazine is the forearm, which serves as a grip for holding the M4-177 while shooting and also as a pumping arm for charging the multi-stroke pneumatic action. Toward the front end of the forearm, on the underside, there is a short section of Picatinny rail which could be used for attaching accessories such as a laser or a flashlight.
The front sight attaches to the Picatinny rail near the muzzle.
Beyond the end of the forearm, you’ll find the barrel, which has a plastic molding on it that provide Picatinny rail sections top and bottom. The post type front sight clamps to the top section of Picatinny rail. Moving back along the barrel, you’ll find another section of Picatinny rail on top of the receiver. The peep type rear sight (which has two different apertures and flips from one to another) clamps to this section of rail or a scope can be mounted. On the right side of the receiver, you’ll find the bolt for cocking the action and a slot for inserting the 5-shot pellet clip.
The right side of the receiver, showing the bolt (pulled to the rear) and the slot for inserting the pellet clip.
Adjusting the sights on the M4-177 is a bit unusual. For elevation adjustment, use the special tool stored in faux magazine to move the sight up or down as needed. For windage adjustment, you’ll need a screwdriver to move the rear sight left or right as required.
The rear sight attaches to the Picatinny rail on top of the receiver.
To load BBs into the M4-177, slide the BB loading port cover to one side, pour in up to 350 steel BBs, and slide the port cover back to its original position. Next, push the BB retainer button forward (toward the muzzle), point the barrel at the ground and twist and shake the air rifle to until the “visual magazine” on the left side of the receiver is filled. Push the BB retainer button back toward the butt stock to keep the BBs in the magazine. Insert the empty pellet clip into the breech slot so that the bolt will pass through one of the pellet chambers. Pump the M4-177 at least 3 times but not more than 10. Pull the bolt all the way back (two clicks) and push it forward again. The magnet on the end of the bolt will pick up a BB from the BB magazine and slide it into the barrel.
Squeeze the trigger. The first stage comes out at 3 lb. 13.4 oz. At about 4 lb. 14 oz., the shot goes down range. At ten pumps, the M4-177 launches steel BBs at around 650 fps. I found that’s enough to blow through both sides of a soup can at 13 yards.
Loading pellets requires inserting 5 pellets into the 5-shot clip (make sure the M4-177 is empty of BBs first). Pump the M4-177 up to ten times, pull the bolt back, slide the clip into the breech until it reaches the first detent, and slide the bolt forward again. Pull the trigger. At 10 pumps, the M4-177 launches Crosman Premier 7.9 gr pellets at about 625 fps and delivered a one-inch edge to edge 5 shot group at 13 yards from a sitting position under relatively lousy conditions. Good enough, I think, for terminating pests in the garden at short range.
In the end, I liked the M4-177. It’s fun to shoot and will definitely put a smile on someone’s face on Christmas morning. For an airgun that will probably sell for under a hundred bucks, that seems like a pretty good deal to me.
Til next time, aim true and shoot straight.
– Jock Elliott
Thanksgiving is just a few days away.
For me, Thanksgiving is the time of year when I take stock of my situation, and – more to the point – all the things that I have to be thankful for. I have been truly blessed. I have many things for which to give thanks, and I hope that you do too.
One of the things that I am thankful for are the folks who read this blog. I am grateful for your readership, your comments, and your feedback. And when you like one of my goofy shooting challenges . . . well, that’s the icing on the cake. So thank you, and keep reading!
The year is rapidly rolling toward the holiday season, and with visions of new airguns dancing in my head, I expect that some of you will receive new airguns for Christmas, and some of you will give new airguns for Christmas. With that in mind, I feel honor-bound to remind all of you that as airgunners our first concern should be for safety.
The basics are pretty simple:
- Never point an airgun at anything you don’t want to see broken or destroyed, injured or killed . . . ever.
- Treat all airguns as loaded even when you “know” they are not.
- Keep your finger out of the trigger guard until ready to shoot and when you are loading your airgun.
- Shoot at a pellet trap or other safe backstop. Don’t use a hard backstop with BBs.
- Make sure everyone on the firing line is wearing eye protection.
- If you are hunting or controlling pests, make certain you know where your pellet will go if you miss. If you are not certain, don’t pull the trigger.
The following is special to parents or anyone else who is involved with children shooting airguns.
Airguns are not toys. They are real air rifles and air pistols and can be dangerous if not handled properly. Your child needs to understand the difference between an airgun and a toy gun is like the difference between a toy car and a real car.
Remember and observe the number one rule of airgun safety: never, ever point your airgun at anything you don’t want to see a hole in, including any person, any animal (except for hunting) or someone else’s property. When the airgun is not aimed at an appropriate target, keep it pointed in a safe direction, such as at the ground.
If you have any doubt that your children and anyone who is with them will observe Rule One, supervise their shooting. If you are not completely certain that they will always handle the airgun safely, supervise them, regardless of age.
Supervision means being close enough to control or redirect the airgun if it is pointed in an unsafe direction. It only takes a moment for a mishap to occur. Be close enough to prevent that from happening – no more than an arm’s length away.
Maintain control of the airgun when it is not being used, including at the beginning and end of each shooting session. Don’t load it and leave it unattended. Store your airgun, unloaded, where it cannot be used by curious youngsters or unauthorized persons. Store the ammunition separately.
Til next time, aim true and shoot straight.
– Jock Elliott
The left side of the Gladiator Mk II
To ready the Gladiator Mk II for shooting, attach the filling probe to a SCUBA tank or high pressure pump, slide it into the filling port at the end of the forward air tube, and slowly fill the Mk II to 220 bar.
The spring-loaded 12-shot magazine is self-indexing.
Next, load the rotary magazine. You’ll notice that the Gladiator now uses the same magazines as the FX Royale. Start by turning the transparent lid to the magazine counterclockwise until it stops. Put one pellet in the open slot on the rear side of the magazine so that the tip of the pellet is pointing out of the hole. This locks the magazine spring in place.
Turn the magazine so that the transparent lid is facing you. Turn the lid clockwise one slot at a time and fill the slots with pellets with the tip of the pellets facing into the hole. Lock the lid in its starting position.
When selecting scope mounts, make sure they are high enough to provide clearance for the magazine.
Next, pull the bolt lever all the way back and insert the magazine, black side toward the muzzle, into the breech from the right side. Now, this is where life got interesting for me while testing the Gladiator Mk II. When I mounted the first scope, the magazine hit the “saddle” of the scope (the bulge where the elevation and windage knobs are mounted) when I tried to slide the magazine into the breech. So, down into the workshop again and I mounted another scope. This one slide into the breech slot, but I couldn’t get the bolt to work properly. I called Airguns of Arizona, and Kip helpfully walked me through the process until I could finally figure out that the magazine was hitting the tube of the scope so that it couldn’t be seated all the way home (almost, but not quite). Finally, a third scope with higher mounts fit properly, and the magazine slid into place.
Push the bolt forward, flick off the safety, and squeeze the trigger. The first stage required only 9 ounces on the sample that I tested. At 1 lb. 2.2 oz., the shot went down range. This a phenomenal trigger, light and crisp, that feels a lot like a match trigger.
On high power, the Mk II launches 18.1 gr. JSB pellets at average of 855 fps, or 29.38 foot-pounds of energy at the muzzle; medium power, 655 fps and 17.24 fp, and low power, 499 fps and 14.42 fp. The good folks at Airguns of Arizona tell me that the Mk II will deliver 95 shots per fill on high power and an astonishing 190 shots on lower power.
At 30 yards, shooting from a casual rest, the Mk II delivered this nice group.
And the accuracy? Well, the accuracy is just fine. At 30 yards with JSB Jumbo pellets, I put 5 shots into a group that measured just .625 inch edge to edge. That works out to well under half an inch center to center.
Yup, if I were in the vermin control business and needed an air rifle that required a minimum of ancillary equipment for a day’s shooting, I think the FX Gladiator Mk II would be number one on my list.
Til Next time, aim true and shoot straight.
– Jock Elliott
